8
Select Switch #1-08617-00
2. Insert the Select Switch’s mono plug into the
receiving jack of the appliance, toy, or device.
3. Turn the appliance to the ON or PLAY position.
For an appliance with pressure-sensitive ON/OFF
control, like a coffee grinder, tape the appliance’s
control button/switch in the ON position.
5. Select a Mode of Control on the Select Switch.
6. Activate the switch.
7. When finished, always turn the On/Off/Mode knob
counter clockwise until it stops. This will extend
the life of the batteries.
Never connect heat-producing
appliances to the Select Switch.
Troubleshooting
If the equipment fails to operate after you have
followed the set-up instructions, use the troubleshooting
suggestions listed below. If the problem persists, call
APH Technical Support at 1-800-223-1839 (U.S.) or
1-502-895-2405.
1. Move the Polarity switch to the opposite side.