2
Allison Park Group Inc.
• 4055 Alpha Drive
• Allison Park, PA
15101
•
www.apgvision.com
Telephone (412) 487-8211
• Fax (412) 486
-3157
• E
-Mail: [email protected]
1
2
3
4
5
6
7
8
Introduction
Developed and tested by APG Inc., this enclosure was designed to protect your device(s) in harsh,
industrial environments. Follow this guide for instructions on assembling and maintaining the enclosure
while ensuring the performance of the integrated component.
Protection Rating
Our 24C, 35C, and 47C Series enclosures are rated NEMA 4 / IP65, guaranteed to be dust proof as well as
protecting against low-pressure spray downs. These enclosures are constructed with an anodized 6061
aluminum and fastened with 18-8 stainless steel.
For a lower cost option our 22C Series enclosures are rated NEMA 12 / IP52; constructed for indoor use
these enclosures protect against personnel contact with the enclosed equipment, are dust protected, and
protect against mild splashes.
All gaskets are made from a silicone rubber
, Viton™ rubber, or EPDM foam
. The viewport window may be
a clear acrylic with a scratch-resistant coating applied to either side, glass, or clear polycarbonate.
Note: Enclosure Bodies differentiate between 22C, 24C,
and 35C/47C Series enclosures. Mounting Arms will fasten
to the 22C, 24C, and 35C/47C Series Enclosure Bodies
differently.