More
Security,
More
Convenience
www.apexis.com.cn
/
www.apexis.cc
Enable
Upload Image on Alarm
to set upload images to FTP once alarmed.
Upload Interval
: Set the upload interval (Seconds).
NOTE
: The total alarm time is 60 seconds.
Figure 10.2
Scheduler
Here you can set the camera alarm during the time you set. Choose Scheduler and set the date & time range.
(Figure 10.3) From Monday to Sunday, and every day divide into 24 hours, each hour divide into 4 quarters.
Left click the frame of the time range, it will turn to blue color, means the time you choose armed.
Click it again, it will turn back to grey, means delete the scheduler.
NOTE
: Make sure the date & time settings are correct firstly.
(Figure 8.3)
ATTENTION
: If you don’t choose
Scheduler
, the camera will alarm anytime when motion triggered.
Figure 10.3
Sound on Alarm
When motion detection triggered, there will be beep sound during the alarm, you can control this sound here.
Enable it, there will be sound once alarmed.
Cancel it, there will be no sound once alarmed.
Record on Alarm
If you want the camera do recording for every alarm, choose Record on Alarm to enable it.
If you do not want the camera do recording once alarm triggered, cancel it here
.
Figure 10.4
Once alarm occurred, there will be some representation:
1. The corresponding status light turns Red and keeps blinking.
Figure 10.5
2. If you set
Sound on Alarm
, plug an earphone or a speaker to the computer you use, you can hear the beep
sound when alarmed.
(
Figure10.4
)
3. If you set
Record on Alarm,
the camera will record automatically for approx one minute. You can find the
record file in the folder which you set.
(
Figure 10.4
)
4. If you set
Send Mail on Alarm
, you will receive email alarm alert once motion triggered.
(
Figure 9.9
)
5. You can also set
Scheduler
to enable the camera sends emails during a special time range you want.
(
Figure 10.3
)
Shenzhen Apexis Electronic Co., Ltd
Tel: +86-755-26509025 Fax: +86-755-26509229
45
