background image

                   

 

More

 

Security,

 

More

 

Convenience

                       

www.apexis.com.cn

 

/

 

www.apexis.cc

   

Left click the frame of the time range, it will turn to blue color, means the time you choose armed. 
Click it again, it will turn back to grey, means delete the scheduler. 

NOTE

: Make sure the date & time settings are correct firstly.

 

(Figure 8.3)

 

ATTENTION

: If you don’t choose 

Scheduler

, the camera will alarm anytime when motion triggered. 

 

Figure 10.5 

 

Sound on Alarm 

When motion detection triggered, there will be beep sound during the alarm, you can control this sound here. 
Enable it, there will be sound once alarmed. 
Cancel it, there will be no sound once alarmed. 

 

Record on Alarm 

If you want the camera do recording for every alarm, choose Record on Alarm to enable it. 
If you do not want the camera do recording once alarm triggered, cancel it here

 

Figure 10.6 

 

Once alarm occurred, there will be some representation: 
1. The corresponding status light turns Red and keeps blinking. 

 

                    Figure 10.7 

2. If you set 

Sound on Alarm

, plug an earphone or a speaker to the computer you use, you can hear the beep 

sound when alarmed. 

(

Figure10.6

)

 

3. If you set 

Record on Alarm,

 the camera will record automatically for approx one minute. You can find the 

record file in the folder which you set. 

(

Figure 10.9

)

 

4. If you set 

Send Mail on Alarm

, you will receive email alarm alert once motion triggered. 

(

Figure 10.0

)

 

5. You can also set 

Scheduler

 to enable the camera sends emails during a special time range you want. 

(

Figure 10.5

)

 

6. If you set 

Upload Image on Alarm

, it will upload images to the FTP Server you set already once alarmed. 

(

Figure 10.4

)

 

NOTE

: Each alarm only last for approx one minute, all these above functions for motion detection triggered 

only. 
 

REC Automatically and Save to PC

 

When you enable motion detect and open the camera monitoring page on the PC. If there is an alarm 
triggered, REC will start automatically for several seconds and save to the PC. 
 

New Feature

: Start the motion detection compensation and Alarm notification by Http. 

 
Shenzhen Apexis Electronic Co., Ltd

 

                 Tel: +86-755-26509025              Fax: +86-755-26509229 

47

Summary of Contents for APM-J012-L-WS
























































Reviews: