3
■
Precaution on Installation
●
When installing this product, do not use any electro-tap in any
case.
Using the electro-tap makes the contact status unstable. Its contact defect may causes
a malfunction to the product and damage to this product and the vehicle.
Be sure to use the attached splice and dedicated tools such as cutting pliers for electric
work to install the product securely.
●
Insulate the metallic portion of the harness securely with a
vinyl tape.
●
Caulking the splice
(1) Peel off the coating of
the wires about 8 mm
(2) Cover with a sleeve
(3) Fold the wires
(4) Caulk securely
※Check if caulking has been performed securely by referring to the following figure
Make the caulking thrust into the wire
(1) Peel off the coating of the wires to be
connected about 5 mm
(2) Peel off the wires to be
branched about 10 mm
(3) Entwine the wires
(4) Caulk securely
※Insulate the caulked portion securely with a vinyl tape
●
Caulking the plug
Caulk the coating by these portions
Caulk the conductors by these portions
