4
■
Precautions for Installation
●
When installing this product, do not use any electro-taps
Using the electro-tap makes the electrical contact status unstable. This contact defect
may cause a malfunction in the product and damage this product and the vehicle.
Be sure to use the attached splice and dedicated tools such as cutting pliers for electric
work to install this product securely and properly.
●
Insulate the metallic portion of the harness securely with electrical
tape.
●
Caulking the plug
●
Caulking the splice
(1) Peel off the coating of
the wires about 8 mm
(2) Cover with a sleeve
(3) Fold the wires
(4) Caulk securely
※
Check if caulking has been performed securely by referring to the following figure
Caulk the coating by these portions
Caulk the conductors by these portions
Make the caulking thrust into the wire
(2) Peel off the wires to be
branched about 10 mm
(3) Entwine the wires
(4) Caulk securely
※
Insulate the caulked portion securely with a vinyl tape
(1) Peel off the coating of the wires to
be connected about 5 mm