APEXi POWER FC, Instruction Manual, Page: 5 / 80

5
Setting mode
Ignition timing map ___________________ 40
Fuel revision map ___________________ 42
Revision of the air flow signal is done _______ 44
Car classification menu _________________ 46
Injector revision is done __________________________ 50
Car classification normal injector data ________ 52
Turbo charger pressure is modified _________________________________ 54
Acceleration increasing in quantity revision _____________________ 58
Test revision is done __________________________________ 60
When starting it modifies fuel injection time ____________ 62
Water temperature revision ___________________________ 64
Rev limit/idle rotational speed is changed ___ 66
Other modes
It indicates program version ____________ 68
It indicates the input/output signal ________________________ 69
Car classification input/output signal menu __________________ 70
Function select menu ___________________ 74
Adjust contrast & back light _______ 76
Initialises the data ____________________________ 77