5
Notice
1. Please read the manual carefully before using the product.
2. When shooting, please fix the ring light on the stand.
3. Products can only be used under rated voltage.
4. Do not pull the wire to try to let the plug out, and do not touch the plug with a wet
hand.
5. The product should be placed in a dry and ventilated place to avoid dampness of the
circuit board and short circuit failure.
6. Please turn off the power supply when stopping using, so as not to affect the service
life of light.
Faut Analysis
The following problems are not necessarily caused by faults. When contacting
distributors and manufacturers, please check the lights again and remove the following
phenomena before repairing them.
Fault 1: Cannot lighten
Analysis:
1) Check whether the power switch is on
2) Check whether the connection between the power plug and the light is loose or input
voltage is correct.
Fault 2: Lightning flashes
Analysis:
1) Check whether the input voltage is correct.
2) Check whether there are objects with high calorific value near the light, which results
in excessive ambient temperature of light.
Maintenance
Use only a soft, lint-free cloth for cleaning. Do not use aggressive or abrasive cleaners.
