Apex Digital MT-FPN4060UV, User Manual

Page: 14 / 60

Test:
(1). Scan Motor Test: The cartridge will automatically
execute test when test starts. If the machine
jumps is strictly and the head will hit the origin,
the test will be automatically stopped and the
cartridge will automatically return to origin.
(2). Total Length Test: Used to test the machine
length to avoid the head hit and also measure
the wheels contrast.
(3). Feed Adjust Test: The right figure is the steps
tests configuration page:
Rough Adjustment: Click to do test of vertical
motor movement 100mm to check the actual
position is correct. If incorrect, change Move
Distance and recalculate the wheels contrast.
Fine Adjustment: click Print vert adjust Picture,
if 0 position is not aligned, change Vert adjust
value and recalculate the wheels contrast.
See previous description about the menu column.
Test: do printing test. If there is break lines, do adjustment;
H. Align; Print horizontal calibration figure. If the line is not straight and aligned,
readjust the head horizontal position.
3.4.2 Tools menu description
Description