background image

 

 

 

Warning: 

In order to avoid overheating, do not cover the appliance.  

Warning:

 This appliance is not equipped with a device to control the room's 

temperature. Do not use this appliance in small rooms whilst occupied by persons 
incapable of leaving the room on their own, unless constant supervision is provided.

 

Warning:

 Normal voltage is still present in this appliance as long as the appliance is 

connected to the electrical source. Always unplug the appliance when not in use.

 

Warning:

 In order to avoid a hazard, due to inadvertently tripping  the

 

Thermal  cut-out, this  appliance  must  not  be  supplied  through  an  external switching 
device,  such  as  a  timer.  Nor  should  it  be  connected  to  a  circuit  this  is  regularly 
switched on and off by the utility.

 

Caution: 

Some parts of this appliance can become very hot and cause

 

burns, particular 

attention has to be given where  children and vulnerable people are present.

   

Caution:

 Hot surface. Do not touch the hot section or heating

 

components of the 

appliance.

 

S 6891 BS 8303 

 
Failure to comply with these regulations could lead to prosecution and deem the warranty 
Invalid. 
 
This appliance must be installed in accordance with the rules in force and used only in a 
sufficiently ventilated space. 
 
Consult all instructions before installation and use of this appliance. 
 
The appliance must be registered once commissioned with the regulatory governing body.  
 
This appliance is free from any asbestos material. Refractories and coal bed are 
constructed from ceramic fibre. 
 

Note - For Republic of Ireland, reference should be made to the relevant standards 
governing installation, particularly in regard to flue sizing and ventilation. See IS813, 
ICP3, IS327 and any other rules in force. 
 
 
 
 

Summary of Contents for Lux Arcus









Reviews: