Instruction Manual
Manual
14
Useful Remote Control Features
DISPLAY
By pressing the key firstly, you may see the current information of the TV screen on the upper right hand
corner of the screen. (channel, antenna mode, time, video, etc.) By pressing secondly allows you to display
the current information of the VCR. To turn off the display, press the key repeatedly.
SCAN
Press the
SCAN
key twice, and the TV will begin to scan through all active channels. To stop the Scan,
pressing any key can interrupt scanning. Please note that Scan will only work in Antenna mode.
PICTURE
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture
modes, press this key, and you can choose among User, Normal, Movie and Sports.
SOUND
Press this key repeatedly, and you can choose among User, Normal, Speech, Movie and Music.
RECALL
This key will allow you to return to the last channel you were viewing. Pressing it again will return you to the
channel you just left.
CC
Pressing the
CC
key will activate the currently selected Closed Caption or Text under the System Menu.
Pressing it again will turn off the Closed Caption or Text.
VIDEO
This key allows you to toggle between antenna and different video modes.
0-9
Press the
0-9
keys to enter channel numbers directly (2-69 in the Air mode or 1-125 in the Cable mode).
Press the corresponding Number key(s) to enter a channel number from high-digit to low-digit.
Each digit should be entered at 3 seconds time interval.
SLEEP
Press the
SLEEP
key repeatedly to switch the TV to one of the following modes :
--
15 30 45 60 90 120 150 180 (Unit: Minute)
The TV will automatically enter the Standby mode when the preset Sleep time is up.
The TV will display a message one minute before the Sleep timer runs out.
MTS/SAP
In the TV mode, the TV can automatically identify MTS stereo
modes among Mono, Stereo, Stereo/SAP and Mono/SAP.
FUNCTIONS & FEATURES (continued)
Signal Received Press
MTS/SAP
key
Mono
Mono
Stereo
Stereo, Mono
Stereo/SAP
Stereo, SAP, Mono
Mono/SAP
Mono, SAP
