Instruction Manual
Manual
Programming the Remote Control
1. Set the
TV/DVD/VCR
switch to the device you want to
control.
2. To program the remote control
1) Press and hold the
SET
key for over 3 seconds until the
LED indicator on the remote control lights up. The remote
control is now in the PROGRAMMING mode.
2) Use the
0-9
keys to enter two-digit code number for your
device. If the right code number was entered, the LED
blinks three times and the remote control exits from the
PROGRAMMING mode. If you enter a code not listed
below, the LED blinks five times and then lights up until
you reenter a right code number.
3) In the PROGRAMMING mode, press any other keys than
0-9
and
F
to quit the mode.
4) If there is no operation within 10 seconds, the remote
control will automatically exit from the PROGRAMMING
mode.
3. Code table
Remote Control Features
TV
00, 01
DVD 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12
VCR 00, 01
Notes:
1. When in operation, please point your remote control
directly to the infrared sensor.
2. Do not expose the remote control to impacts, water
or disassemble it.
3. Do not repeatedly press the buttons on theremote control.
Allow interval of no less than one second between
selections.
4. When "
" displayed during DVD playback, the function
is not operational.
7
