11
A
P
E
X
D
I
G
I
T
A
L
AD - 1100w
Connecting to a TV using a RF Modulator
COAXIAL
VIDEO OUT
AUDIO OUT
L
R
2
1
RF-Modulator
Your TV (Back)
(Back)
TV / Video Input
Conntection
TV /Audio Input
Conntection
V
To TV
Antenna
R
L
(R)
(R)
(L)
(L)
(V)
To your Cable/Satelite connection
(V)
UHF/Antenna IN
Coaxial
Your Cable/Satelite Box
IN
OUT
IN
OUT
Your VCR (Back)
UHF/Antenna OUT
Coaxial
Continued
RF-Modulator
Your TV (Back)
V
To TV
Antenna
R
L
To your Cable/Satelite connection
UHF/Antenna IN
Coaxial
Your Cable/Satelite Box
IN
OUT
COAXIAL
VIDEO OUT
AUDIO OUT
L
R
2
1
DVD (Back)
TV / Video Input
Conntection
TV /Audio Input
Conntection
(R)
(R)
(L)
(L)
(V)
(V)
Figure 3
Connection 3
Connecting the TV , DVD, VCR, and Cable or Satellite
Box
1) Connect the three-terminal composite video cable to the back
of your Apex DVD player. This cable has three prongs, one each
in yellow, red, and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into the jack labeled
"Front-L"; the red prong will go into the jack labeled "Front-R".
2) Connect the opposite end of the composite-video cable into
the back of the RF modulator. Make sure to match up the colors
correctly.
3) Connect a coaxial cable from the "Antenna Out" jack on the
back of your cable or satellite receiver to the "Antenna In" jack on
the back of your VCR. The coaxial cable is the one-wire, metal-
ended type that you screw onto the VCR.
4) Connect a coaxial cable from the "Antenna Out" jack on the
back of your VCR to the "Antenna" jack on the RF modulator.
5) Connect a coaxial cable from the "To TV" jack on the RF
modulator to the jack on the back of your TV.
6) Make sure your TV is set to the appropriate channel before
using your DVD player. In most cases, this is channel 3 or 4. Also
make sure that the VCR is set to the appropriate channel, as
well. This selector is usually on the back of your VCR. Consult
your VCR manual for further information.
Figure 2
Connection 2
Connecting the TV to the DVD through
the Cable or Satellite Box
1) Connect the three-terminal composite video
cable to the back of your Apex DVD player. This
cable has three prongs, one each in yellow, red,
and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into
the jack labeled "Front-L"; the red prong will go
into the jack labeled "Front-R".
2) Connect the opposite end of the composite-
video cable into the back of the RF modulator.
Make sure to match up the colors correctly.
3) Connect a coaxial cable from the "Antenna
Out" jack on the back of your Cable or Satellite
receiver to the "Antenna" jack on the RF
modulator. The coaxial cable is the one-wire,
metal-ended type that you screw onto the VCR.
4) Connect a coaxial cable from the "To TV" jack on the RF modulator
to the jack on the back of your TV.
5) Make sure your TV is set to the appropriate channel before using
your DVD player. In most cases, this is channel 3 or 4.
