![background image](http://html1.mh-extra.com/html/apex-digital/50-50p/50-50p_quick-setup-manual_2953097002.webp)
FIGURE #1
A Water supply adapter valve
H Pre-filter sump
B Cold water shut-off valve
J Pre-carbon filter sumps
C Hot water shut-off valve
K User friendly wrench
D Auxiliary faucet with handle in closed position
L Membrane assembly
E Garbage disposal
M Auto shut-off valve
F Drain Saddle
N Post-filter
G Storage tank with valve in open position
TAPPING INTO THE COLD WATER LINE
(Using the water supply adapter model SV-1)
NOTE: The drinking water system must be connected to the
COLD water supply only.
1) Turn off the cold water supply to the sink faucet by locating the
round or oblong handle on the right side of the sink cabinet and
turning clockwise until the water supply is off.
NOTE: If the cold water shut-off valve fails to turn off the water, the
house water supply can be turned off at the main water supply.
2) The water supply adapter (Fig.#2) can be installed at the faucet
connection (A of Fig.#1) of the cold water line or at the shut-off
valve connection (B of Fig.#1).
1