Apevia X-Qpack Installation Manual Download Page 2

Page: 2 / 4

10.Then bend it up and down to

11.Once you detach the plate,

12.Unscrew the HDD cage.

detach it.

Use a screw driver to knock it out.

13.Pull up and take out the HDD

14.Install 5.25 drives.

15.Screw them in place.

cage.

16.Install 3.5” drives.

17.Screw them in place.

18.Put the HDD cage back.

19.Screw it up.

20.LCD sensors: You can tape

20.Tape another temperature

temperature

sensor

HDD

sensor on the heat sink of CPU

get

accurate

temperature

fan to get CPU temperature.

of HDD.

Then, connect the 4-pin male
connector from the LCD to

power supply 4-pin female
connector.

Summary of Contents for X-Qpack

Page 1: ...motherboard tray 5 If your motherboard size and layout 6 Install motherboard is not universal standard then you need to remove the I O bracket and replace with the one that comes with your motherboard...

Page 2: ...15 Screw them in place cage 16 Install 3 5 drives 17 Screw them in place 18 Put the HDD cage back 19 Screw it up 20 LCD sensors You can tape 20 Tape another temperature temperature sensor on HDD to s...

Page 3: ...with the screw up Front handle It takes up to 40 lbs of weight X Qpack Series USB 1394 Audio cable pin assignment Cable Cable Color Function RED 5V WHITE D GREEN D USB 2 0 BLACK GND WHITE VP BLACK VG...

Page 4: ...n mind that it will be a tight fit Changing the LCD display mode Our LCD temperature displays use Celsius as the default setting as is used on Intel AMI motherboards If you would prefer to display sys...