32.LCD Temperature Readout: 33.Remove the protective plastic
34.This is the temperature
Connect 4-pin Male connector from tube from the sensor.
sensor. It’s very fragile.
LCD to a 4-pin Female connector
Be gentle.
from power supply.
35.You can either tape the sensor on hard drive or on CPU Heat
36.Once powered on, the LCD
sink or leave it inside the case to get the overall system temperature.
shows temperature readout with
back lighting
37.Fan Speed Controller: Find a
38.Link all case fans’ cables
39.Then connect the Male end to
4pin male connector from front
together. There will be 1*Male
a 4pin Female (output) from the
panel with “Input DC 12V” and
and 1*Female left out at each
front panel fan speed controller
connector it to a 4pin female
end.
unit.
connector from power supply.
