40.You can either tape the sensor on hard drive or on CPU Heat
41.This is how the front panel looks
sink or leave it inside the case to get the overall system temperature. like after power on.
42.Real Fan (Optional): You
43.Link all case fans’ cables
44.Find “Case Feet” in the screw box.
can install 1*80mm up to
together. There will be 1*Male
Lay case down and put “Case Feet” on.
120mm at rear.
and 1*Female left out at each
end. Just connect the Male to
a 4-Pin Female connector from
the Power supply.
Note:
1.You can link together all the 4-pin connectors(male to female) from all the case fans, LCD, LED, HDD and
just use one of the 4-pin Molex connectors from power supply. That will leave you more 4-pin Molex connectors
from your power supply for other devices.
