31.Find “Power SW”, “+P LED”
33.Find “Case Speaker” from
34.Install case speaker to M/B
& “-P LED” cables and plug onto screw box.
following M/B user manual
M/B. Please refer to M/B user
manual.
35.Install LED Lights: Find 2*LED
36.Connect the 4-pin Male connector
connectors from the front panel.
to a 4-pin Female connector from
They are 2*2-pin connectors that
power supply.
lead to 2*4-pin connectors
(1*Male, 1*Female)
37.LCD Temperature Readout:
38.Remove the protective plastic
39.This is the temperature
Connect 4-pin Male connector from tube from the sensor.
Sensor. It’s very fragile.
LCD to a 4-pin Female connector
Be gentle.
from power
supply.
