31.Find “Power SW” and “+P LED”
32.Plug audio cables to 33.Find “Case Speaker” from
“-P LED” cables and plug onto M/B.
sound Card or M/B. screw box.
Please refer to M/B user manual.
34.Install Case Speaker to M/B
35.LCD Temperature Readout: Connect 36.Remove the protective plastic
following M/B user manual.
4-pin Male connector from LCD to
tube from the sensor.
a 4-pin Female connector from power
supply.
37.This is the temperature sensor.
38.You can either tape the sensor on Hard Drive or on CPU Heat Sink
It is very fragile. Be gentle.
or leave it inside the case to get the overall system temperature.
