7.Screw in all the screws into the
8.Same as step 7.
motherboard stand-offs
9.Take out front panel:(Optional. Only if you need to install case fans in the front)
Step (1): Unscrew the side
Step (2): Take out the side
Step (3): There are 6 screws hold
Panel (motherboard side)
panel (motherboard side)
the front panel to the case. Unscrew
3 screws at one side from inside of
the case.
Step (4): Unscrew the other
Step (5): Pull out the front panel 10. Optional: Install case fan in
3 screws from the other side.
from the bottom.
the front panel (You can put up
to 2*80mm fans). Then screw the
front panel back.
