Contact Us
If you have any questions, comments, or
concerns, please don’t hesitate to contact any
of our Home Theater Gurus at 888.880.8992
or through a live chat via our website at
www.aperionaudio.com - they’ll be happy to
help you out with anything you might need.
Aperion Audio
www.aperionaudio.com
[email protected]
[email protected]
Aperion Audio Forum:
www.aperionaudio.com/community/forums
Frequently Asked Questions (FAQ)
www.aperionaudio.com/faq
Aperion University
www.aperionaudio.com/learn
888.880.8992
18151 SW Boones Ferry Road
Portland, OR 97224
Congratulations!
You’re just moments away from experiencing your new
Verus
TM
speakers. We’re honored that you chose Ape
-
rion Audio to bring your music and movies to life! Feel
free to contact us if we can answer any questions or
provide you with setup advice. Above all, Enjoy!
-The Aperion Audio Team
Features
• 1" Custom Aperion ASR Tweeter
• One 4” Woven Kevlar Woofer with Aluminum
Phase Plug
• Two 6” Woven Kevlar Woofers with PVC Dust Cap
and Rubber Surrounds
• Furniture-grade Finish
• 5-Way Gold-plated Binding Posts
• Anti-Resonant Cabinet
• Acoustically Transparent Metal Grille
Package Contents
• One (1) Aperion Verus
TM
Grand Center Speaker
• Two (2) Rubber Speaker Feet
Specifications
Frequency Response: (+/- 3dB) 50-20,000 Hz
(+/- 6dB) 42-22,000 Hz
Nominal Impedance: 6 Ohms
Sensitivity: 87 dB
Recommended Power: 40
- 300 Watts
Driver Configuration: 3- Way
Bass Alignment: Sealed
Dimensions: 9" H x 24.75" W x 11" D
Weight: 39 lbs.
Connections
To connect your speaker to your receiver you will need
standard 2-conductor, stranded speaker wire.
Preparing the Wire
1) Split the last 4” of your speaker wire into two
separate strands.
2) Strip 1/2” of the shielding off of the end of each
wire (see figure A).
3) Twist the exposed copper strands with your fingers
until they are tightly unified. Be sure there are no
“flyaway” strands (see figure B).
A
B
If You’re Using Bare Wire
1) Unscrew the binding posts on the back of your
speaker by turning counter-clockwise.
2) Insert the bare speaker wire into the hole in
the binding post and tighten it securely by
turning clockwise (see figure C).
If You’re Using Banana Plugs
1) Be sure to follow the instructions for your
banana plugs to attach them to the wire.
2) Screw the binding posts in completely by
turning clockwise.
3) Insert the banana plugs into the open end of
the binding post (see figure D).
Note:
As you make your connections, be sure to
connect the positive terminals on your receiver to
the positive terminals on your speakers. Most
2- conductor wire has screen printing on one side
to help you differentiate between the two strands.
Placement Recommendations
Ideally, your Aperion Verus Grand Center should be
placed so that it’s centered either above or below
your screen. If you can’t center it perfectly, just get
as close to centered as possible. You may also use a
floor stand if that works better in your room.
VoiceRight
TM
The Verus Grand Center employs Aperion’s own
VoiceRight
TM
technology; a bass correction switch
that allows you to get the best performance possible
whether your speaker is on a stand, wall mounted,
or in a cabinet. Simply flip the switch on the back
of your speaker to match how your center is placed
in your room (see figure E below).
C
D
E
™
VoiceRight
On Stand
Features, Specifications, and Connections
