a soft brush to remove the contaminants. Afterwards, soak the electrode in 3M KCL solution (SKU: AI1107)
for at least 1 hour. Rinse it off, then re-calibrate it before using again.
5. The connector of the electrode should be kept clean and dry. If contaminated, please clean it with medical
cotton and isopropyl alcohol and blow-dry it to prevent short circuit of the electrode or slow response of
the electrode.
6. The electrode should avoid testing strong alkaline solutions, as well as dehydrating media such as absolute
ethanol and concentrated sulfuric acid. If testing such solutions, the immersion time should be minimized
and the electrode should be carefully cleaned after use.
7. Every pH electrode will eventually age and fail. The typical service life of Apera pH electrodes is 12-24
months depending on the frequency of usage and how well you keep it clean and properly stored. We
recommend replacing your electrode every 12-18 months to ensure the best performance.
Warranty
We warrant this electrode to be free from defects in material and workmanship and agree to repair or replace
free of charge, at option of APERA INSTRUMENTS, LLC, any malfunctioned or damaged product attributable
to responsibility of APERA INSTRUMENTS, LLC for a period of SIX MONTHS from the delivery.
This limited warranty does NOT cover any damages due to:
Accidental damage, transportation, storage, improper use, failure to follow the product instructions or to
perform any preventive maintenance, unauthorized repair or modifications, normal wear and tear, or other
external causes or actions beyond our reasonable control.
To get the fastest warranty fulfillment, go to
support.aperainst.com
and click
“New Support Ticket”
on the
upper right corner. Fill out the form and click submit, one of our customer care specialists will help you fulfill
the warranty within one business day.
APERA INSTRUMENTS, LLC
Address: 6656 Busch Blvd, Columbus, OH 43229 Phone: 1-614-285-3080
Website:
aperainst.com
Email: [email protected]
