Apelson UBMFTZ60SS, User Manual

Page: 18 / 24

18
The following circumstances may not be a problem. Do not
contact the customer services until the problem has been
confirmed.
ERROR AND
SAFETY CODES
GENERAL
FUNCTIONS
SOLUTIONS
Er 3 or Er 4 Temperature
sensor error
Call customer
service
Er0 Communication
failure
Call customer
services
WHAT SHOULD I DO IF THE OVEN DOESN’T
HEAT UP?
Check to see if one of the following actions resolves the
issue:
The oven may not be switched on. Switch the oven
on.
The clock may not be set. Set the clock (see section
“Setting the clock”).
Check to see if the required settings have been
applied.
A household fuse may have blown or a circuit breaker
may have tripped. Replace the fuses or reset the
circuit. If this happens repeatedly, call the Service
Centre.
WHAT SHOULD I DO IF, EVEN THOUGH THE
OVEN FUNCTION AND TEMPERATURE HAVE
BEEN SET, THE OVEN DOES NOT HEAT UP?
There may be problems with the internal electrical
connections. Call the Service Centre.
WHAT SHOULD I DO IF THE TIME DISPLAY IS
BLINKING?
There was a power failure. Set the clock (see “Setting the
clock”).
WHAT SHOULD I DO IF THE OVEN LIGHT DOES
NOT ILLUMINATE?
The oven light is faulty. Replace the oven light bulb (see
“Replacing the oven lamp the lamp”).
WHAT SHOULD I DO IF THE OVEN’S FAN IS
RUNNING WITHOUT HAVING BEEN SET?
Following use, the oven’s fan runs until the oven has
cooled down. Call the service centre if the fan continues to
run after the oven has cooled down.
THE GRILL DOES NOT HEAT UP PROPERLY?
The grill power is set to low, turn the temperature control
dial to maximum.
WHAT SHOULD I DO AFTER HEATING FOR
SOME TIME, THE OVEN STOPS HEATING SUD-
DENLY AND ALL THE ELECTRIC PARTS DO NOT
WORK?
Check to see if one of the following actions resolves the
issue:
The automatic protect system works when the
temperature inside oven is very high. You should ask a
professional technician to help you. Open the top cover
and push the button of temperature limiter with a tool,
and then connect the oven to electric again.
A household fuse may have blown or a circuit breaker may
have tripped. Replace the fuses or reset the circuit. If this
happens repeatedly, call an authorised electrician.
TROUBLESHOOTING
UB MFTZ60SS