r1
Plate Dishes
100
13
Rack
2
r2
Ready-Made
Meals/Frozen
100
18
Remove lid from
Container and
Put on rake
Rack
2
r3
Beans
100
35
Disinfection:time
And temperature
According to 1L
capacity
Rack
2
r4
Cherries
80
35
Rack
2
r5
Plums
90
35
Rack
2
r6
Baby Bottles
100
12
Rack
2
9
、
TIMED
After setting cooking time and parameter, press PT1,delay time function begins to
work, and DSP4 shows “
”. DPS1 will show current time, DSP2 show Auto. Press
PT1 to set delay time. Then press PT2 to confirm the beginning time of delay.
DSP1 shows the delayed start time you set and DSP2 shows “AUTO”
Press PT2 for 3 seconds if you want to cancel the selected function.
10
、
PAUSE DURING OF COOKING
10.1 Pause or Cancel Cooking
You can stop the cooking process at any time by pressing PT2.
Open the door in the process of cooking to pause (not be recommended due to lots of
vapors may hurt you)
Keep pressed PT2 for 3 seconds; you will hear sound and the process will be
canceled.
Notice: Keep a certain distance when you open the appliance door due to lots of vapors
may hurt you
10.2 Modifying Parameters
The operating parameters (time\temperature\weight) can only be modified when the
cooking process has been interrupted. Proceed as follows:
Press PT1 and turn it to left or right to modify parameters, Press PT1 once to confirm.
Press PT2 to continue cooking
10.3 Standby mode
After choosing function and setting parameter, Do not press PT2to confirm the setting.
Press PT2 for a long time to go to standby mode.
After choosing function and setting parameter, press PT2 to confirm setting. Press
PT2 for a long time, PUMP will flash on DSP1. Or press PT2 to pause, then press
PT2 for a long time, PUMP will flash on DSP1, turn PT2 to re choose function.
In standby mode, press PT2 button to enter power off mode
。
11
、
CLOSE OFF STEAM COOKING
11.1 End program with steam function.
When program with steam function is end or when the program is cancelled, DSP1
will flash PUMP IN, and it will beep for 3 times every 30 seconds in 5 minutes.DSP1
shows PUMP IN, which means the pump automatically pumped water back to boiler.
DPS2 shows PUMP OUT, which means pump back is finished and return back to standby
