![Apec Water CS-2500 Installation Instructions & Owner'S Manual Download Page 3](http://html1.mh-extra.com/html/apec-water/cs-2500/cs-2500_installation-instructions-and-owners-manual_2952290003.webp)
1
Copyright:
This manual is copyrighted by APEC Inc. Under the copyright laws, this manual may not be reproduced in
any form, in whole or part, without the prior written consent of APEC Inc. Manual print ver. 1.0, 2015 May.
Thank you for choosing APEC reverse osmosis systems.
You now own the finest water filter in America.
Please read and become familiar with instructions and parts needed before proceeding with the
installation.
BEFORE INSTALLATION:
Inspect the system:
Please take the system and all the components out of the box. Inspect the system and all the
connection fittings carefully, make sure nothing is damaged during shipping. If any part is cracked or bro-
ken, please do not proceed with the installation and contact APEC or your distributor for an exchange or
diagnosis.
Recommended tools list:
•
Variable speed drill
•
Adjustable wrench, pliers
•
Phillips screwdriver
•
Utility knife, or scissors
•
Teflon tape
Operating Parameter
•
Operating pressure: 100psi maximum
•
Feed water temperature: 35 – 100 degree F (2-37 degree C)
•
Do not
connect this unit to
hot
water source
•
Install the system in a sheltered environment, avoid exposure to hot and cold weather or under
direct sun light.
General Installation/Operation/Maintenance Requirements
•
Installation needs to comply with state and local laws and regulations.
•
System must be installed indoor away from possible environmental damage
•
Do not use with water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after system. Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts.
Summary of Contents for CS-2500
Page 2: ......