10
Reference subwoofer
8. Clip led:
this led will light up when the integrated power
amplifier is being driven to its limits: lower the subwoofer level
immediately to avoid any damage to the amplifier or speaker.
9. Mains power fuse:
replace only with a fuse of the same rating.
In case the fuse blows regularly, bring the unit to your dealer
for service.
10. Main power switch:
flip the switch to power the unit on and
off.
11. Speaker level inputs:
connect to the speaker outputs of your
power amplifier whenever a line level signal (preamp out,
subwoofer out or LFE) is not available. Maximum power of the
amplifier should be less than 200 watts per channel at 8 ohms.
Do not connect this to a 100 volt speaker line!
