7
5
6
Instruction manual
VINCI 4
Limited edition high-end loudspeaker
Limited edition high-end loudspeaker
Connecting the speakers
Ideally, you should position the speakers
at ear level, but you can also mount the
speakers on the wall or against the ceiling
using our VINCI 5 bracket, available in
black and white. For more info about this
bracket, please check our website. VINCI
4 is also compatible with many other
commercially available speaker brackets.
Speaker positioning
Mounting holes with
suitable inserts are already
present at the back of the
speaker. The mounting
holes are spaced 58 mm
apart, located horizontally
in the middle of the
speaker. Screw thread
is M6, maximum thread
length is 12 mm.
Connect the positive or plus output (red) from
your amplifier to the red connector at the back
of the speaker. Connect the negative or minus
output (black) to the black connector at the back
of the speaker. No need to mention: always use
good quality speaker cable. The speaker terminals
accept speaker wire up to 2.5 mm² and 4 mm
banana connectors.
• Use cables with clear color indication and
maintain polarity throughout the whole
system.
• Avoid loud feedback from microphones,
this can damage your speaker.
• Please check the unit’s condition after
unpacking. If the outside of the carton
box has been damaged, inform your
shipper immediately.
• For indoor use only. Do not expose the
unit to outdoor weather conditions.
Recommended amplifier
10 to 120 watts, no
clipping
Nominal impedance
6 Ohm
Frequency response (+- 3
dB)
70 – 25000 Hz
Low frequency point
58 Hz
LF speaker
4 inch coated paper cone
HF speaker
3/4 inch silk dome
Cabinet
Bass reflex
Dimensions HxWxD (mm)
210 x 136 x 164 (including
grille), 210 x 136 x 150
(without grille)
Weight
2.1 kg
Cabinet material
High gloss finish MDF
Colour
Black or white
Specifications
developed
by
Audioprof nv
Industriepark Brechtsebaan 8 bus 1
2900 Schoten - Belgium
Company names, product names and
trademarks are property of their respective
owners.
Apart-Audio specifications are subject to
change without notice.
