WWW.APART-AUDIO.COM
2
Features
The APart PC3000R is a professional multisource CD/USB/SD card music player with integrated FM RDS
and DAB+ tuner, equipped with multiple independent analog outputs, coaxial and optical digital output for the
CD/USB/SD player and a RS232 port for use in automated systems.
The maximum analog output level can be preset at the back to match the output level of other audio sources.
Additionally there is a combi output available. This output will play the music from the CD/USB/SD player by
default. When there is no media playing from the CD/USB/SD player, the output will automatically switch to
the tuner (FM or DAB+) output after a few seconds, provided that the tuner is not in standby mode.
The unit can be controlled by the front panel buttons, infrared remote (included), infrared remote extender
such as PIR-REC (optional) or RS232 commands. A list with the possible RS232 commands is included
in this manual. If you wish to control the unit using a third party infrared remote control unit, use the learn
function on your third party remote to transfer the commands from the included remote. Read the manual of
your third party remote for more details.
The CD/USB/SD player has an additional digital volume control, which can be operated via the infrared
remote or via serial control.
Important safety instructions
• Please check the carton box for any kind of damage on reception of the goods.
In case of a damaged carton, please contact your dealer before opening the carton.
• Read all documentation before operating your equipment.
• Keep all documentation for future reference.
• Save the carton and packing material even if the equipment has arrived in good condition.
• Should you ever need to ship the unit, use only the original factory packing.
• Do not spill water or other liquids into or on the unit.
• Make sure power outlets conform to the power requirements listed on the back of the unit.
• Do not use the unit if the electrical power cord is frayed or broken.
• Always operate the unit with the AC ground wire connected to the electrical system ground.
• Have gain controls on amplifiers turned down during power-up to prevent speaker damage
if there are high signal levels at the inputs.
• Do not connect the inputs / outputs of amplifiers or consoles to any other voltage source,
such as a battery, mains source, or power supply, regardless of whether the amplifier
or console is turned on or off.
• Power down & disconnect units from mains voltage before making connections.
• Do not use the unit near stoves, heat registers, radiators, or other heat producing devices.
• Do not remove the cover. Removing the cover will expose you to potentially dangerous voltages.
• Do not drive the inputs with a signal level higher than that required to drive equipment to full output.
• In case of mal-function this device should be serviced by qualified service personnel only.
