5
15. Priority volume control
With this attenuator you can set the desired level of the line level signal inserted into the
priority signal input (11c). This input becomes active when the prior contact is closed (11b)
16. Program volume
With this attenuator you can set the desired level of the line level signal inserted into the
program signal input (12)
17. Bass control
Adjust as per your taste. In reverbant rooms intelligibility can be increased by decrasing the
DPRXQWRIEDVV7KHFHQWUHSRVLWLRQJLYHV\RXDÀDWUHVSRQVH
,Q9DSSOLFDWLRQVLW¶VQRWUHFRPPHQGHGWRUHDOO\ERRVWEDVVEHFDXVHLWFDQRYHUORDGWKHDPSOL¿HU
or speakers to easily. We recommend to use this control only as low-cut or as well considered bass
response adjustment.
7UHEOHFRQWURO
Adjust the level as per your taste or needs. Adding high frequencies gives brillance to your sound.
High freq. feedback can be removed by decreasing the amount of treble.
7KHFHQWUHSRVLWLRQJLYHV\RXDÀDWUHVSRQVH
$LUÀRZRXWSXW
7KLVDLUÀRZRXWSXWVVKRXOGEHNHSWIUHHDWDOOWLPHV
To give the fan a longer life time, it only starts running when the heatsink
reaches a certain temperature.
20. Bridge
7RFRQ¿JXUHWKHDPSOL¿HUWREULGJHPRGH :DWWV9ROWVXVHWKHIROORZLQJ
connections.
&RQQHFWWKHORXGVSHDNHUOLQHWKHKRWSROHWRWKHFKDQQHODPSOL¿HU9FRQQHFWRU
DQGWKHQHJDWLYHSROHWRWKHFKDQQHODPSOL¿HU9FRQQHFWRU
8VHWKH9FRQQHFWRUVLI\RXZDQWWRXVHWKH9ROWVVHWWLQJRUWKH
connections if you want to
FRQQHFWDQ
speaker.
2) Connect the audio signal to the channel 1 inputs. (in bridge mode the channel 2 inputs
are not in use).
3) Push the bridge button, verify if the yellow led on the frontpanel is on.
1RZ\RXUDPSOL¿HULVFDSDEOHRISURGXFLQJXSWR:DWWVLQWR9ROWVVSHDNHUOLQHV
8VHWKHFKDQQHODXGLRLQSXWVIRUEULGJHPRGH
Push the bridge button
to enable bridge mode.
BRIDGE MODE
OUTPUT
MIN. IMPEDANCE
100VOLTS
21
70VOLTS
10.5
4
8