5
Corner mounting the speaker
Ceiling mounting the speaker
Consider to hide the speaker cable by guiding it through one of the 4 pre-cut cable-
entries on the sides of the bracket base. Such a pre-cut cable entry can be easily cut
away. From here you can lead the speaker wire to the connector.
When you need to mount the speakers under a very wide or difficult angle, first
rotate the base plate by 45 or 90 degrees in order to get the maximum tilt angle into
the right direction. Another method of getting a special angle, especially for ceiling
mouting, is to turn the H-hook by 180°.
Now slide out the rubber security piece from the back of the speaker, slide the
speaker on the H-hook of the mounting bracket. Slide the rubber part back in place to
lock and secure the cabinet. Plug the euroblock connector into the speaker.
Using the appropriate mounting hardware, mount the bracket to the ceiling. Mounting materials for solid
brick walls are included. For other materials you may need other hardware, available from your local
hardware store. Slide the speaker onto the mounting bracket in such a way that it won’t slide off even
without the rubber locking piece in place. After you slide on the speaker, slide the rubber part back in place
to lock and secure the cabinet. Plug the euroblock connector into the speaker.
