APART MA120, Instruction Manual, Page: 14 / 24

14
Mixing amplifiers
The unit will wake up from manual standby by any of the
following:
• Pressing the standby / power button.
• Activating the emergency input by the emergency vox or the
emergency mute all.
• Cycling the power using the rear power switch
(or a mains power interruption).
• Pushing any front panel button.
The unit will wake up from auto standby by any of the
following:
• Activating the previously selected sound source
(i.e. signal present on the previously selected input**).
• Pushing any front panel button.
• Activating the paging contact.
• Activating the emergency input by the emergency vox or the
emergency switch.
• Cycling the power using the rear power switch (or a mains
power interruption).
*Note: when the audio cable at the selected input is long and noisy,
the unit will not go to auto standby mode.
**The minimum required signal level required to wake up the unit
from auto standby is 2-10 mVrms for line inputs and
0.1 - 0.5 mVrms for microphone signals.