Instruction manual
DIMIC1/12(S)
7
• Balanced line-out allows long cables (DIMIC1/12)
• Easy connection using standardized CAT5 cables
• External power supply possible
• Indoor use only
Connecting the unit
Consult the manual of your master unit before connecting the
microphone. Use a standard CAT5 cable to connect the microphone
to the main unit. Normally, the main unit will also provide the
necessary power to the microphone. Consult the manual of your
main unit for more details.
DIMIC12S, the slave unit, cannot be used without the DIMIC12
digital paging station. The purpose of the slave unit is to expand the
number of zones and/or programmable function keys on the paging
station. The slave unit is connected to the paging station using the
flat cable supplied with the slave unit. It is possible to daisy chain up
to 7 slave units.
The opening for the flat cable is at the right side of the DIMIC12
unit. Just pop off the small lid and connect the flat cable. Connect
the other end to the left side of the slave unit and so on…
