APART D-ALINP, Instruction Manual

Page: 12 / 16

10
LOCAL INPUT CONTROLS
Using D-ALINP
To use the D-ALINP module please see that the
balanced input is configured as mono and that a
phantom voltage is present.
The D-ALINP sums the RCA-cinch inputs to mono. The
microphone and RCA-inputs have separate volume
control.
You will need to adjust the LINE input gain of your
host-device depending on your phantom voltage level
and depending on the source you will connect to the
ALINP panel.
As a rule of tumb: connect your source to the ALINP
panel, set the ALINP volume to 80% on the panel
and then adjust the input gain of your host to have
sufficient input (but not clipping) to your host device.