WWW.APART-AUDIO.COM
100V / 70V
low impedance
Technical specifications
The loudspeaker is easy to install, due
to its simple mounting system.
(1)
Cut out the mounting hole with diameter
= 85 mm.
When making the hole in your
mounting panel, double check if there
are no cables or any other obstructions
behind the mounting panel. Cutting the
mounting panel without this check might
result in damaged infrastructure or power
lines. Please make sure that the mounting
structure is capable of safely supporting the
speaker’s weight.
(2)
Connect the speaker wires.
(3)
Insert the speaker in the precut speaker
opening:
(a)
pull the 2 spring clamps
backwards and
(b)
carefully slide the
speaker in place until it sits firmly.
NOTE: for use in low impedance systems,
always disconnect the 100/70 volt
transformer and connect the low impedance
speaker wires directly at the speaker.
1
3
2
a
a
b
Mounting the loudspeaker
outside diameter
105 mm
depth
74 mm
cutout
85 mm
loudspeaker system
dual cone
woofer size
3 inch
woofer cone material
paper
mounting system
2 springs
100/70V* power taps
6 - 3 - 1.5 – 0.75* watts
impedance
16 ohms
low impedance dynamic power
20 watts
SPL 1W/1m
87 dB
max SPL 1m
99 dB
frequency response
120 - 18 kHz
main construction material
steel
grille main material
aluminium
IP rating
50
applicable low impedance
yes
applicable in 100V / 70V
yes
dispersion angle 1000 Hz
180°
*0.75 W: 70 volt only
