3
• Do not use the unit near stoves, heat registers, radiators, or other heat producing
devices.
• Do not remove the cover. Removing the cover will expose you to potentially
dangerous volt¬ages.
• Do not drive the inputs with a signal level higher than that required to drive
equipment to full output.
• Do not run the output of any amplifier back into another input.
• In case of malfunction, this device should be serviced by qualified service
personnel only.
• For indoor use only! Do not expose the speaker to high humidity levels and/or
high ambient temperatures.
• Avoid exposure to direct sunlight. Long term exposure to high UV radiation may
cause color changes over time.
• Excellent musical quality, crystal clear voice reproduction, high sound level output
• Active speaker that consists of an active and passive speaker
• 2 x 20W output power.
• Ideally suited for AV monitor applications requiring modest sound pressure levels.
• 2 way bass reflex speaker with 5 ¼ inch woofer and 1 inch soft dome tweeter.
• Molded ABS cabinet.
• Painted metal speaker brackets with various possible installing angles.
• All connections and controls are positioned at the backside of the active (left
channel) speaker. The right speaker is connected via a normal speaker cable.
This cable is connected at the rear of the active (left) speaker.
• Easy installation, even in room corners thanks to flexible mounting brackets
(included)
• Can also be placed freestanding
• Separate bass and treble tone controls.
• Volume control.
• Stereo RCA/Cinch input for unbalanced line level signals.
• Stereo minijack input with increased sensitivity, compatible with portable MP3
players, laptop…
• Power LED and accurate clip indicator LEDs.
• Improved thermal design, built for long term use.
• Indoor use only
Features and benefits
