EN-H10-G
HORN SPEAKER
To operate the product according to the EN 54-24 standard, an equalizer has to be inserted into the signal path, which has a
frequency response as specified in the following table.
Since horn type speakers should not be driven with full power below their low end response, adding a high-pass filter 200
Hz/-3 dB with a 6 dB/octave slope is recommended (shelving filter).
EN 54-24
certified
Frequency
[Hz]
Relative Level to
1 kHz for EN-H10-G
[dB]
Tolerance
[dB]
100
-12.9
+2/-10
125
-12
+2/-10
160
-12.2
+2/-10
200
-9.2
+2/-10
250
-3.2
+2/-10
315
+5.0
+2/-10
400
+6.6
+2/-10
500
+6.0
+2/-4
630
+4.6
+2/-2
800
+8.5
+2/-2
1k
0
+2/-2
1.25k
-2.4
+2/-2
1.6k
+0.4
+2/-2
2k
+0.9
+2/-2
2.5k
+2.3
+2/-2
3.15k
+4.0
+2/-2
4k
+6.2
+2/-2
5k
+10.0
+2/-2
6.3k
+12.1
+2/-2
8k
+13.8
+2/-4
10k
+13.7
+2/-6