HDMI-8x8 Matrix Switch
11
5.6.4 DIP Switch (8 pins)
Figure 5.12: DIP Switch
Dip switch pins 1 to 5: Down position (ON) is “0”, the up position (OFF) is “1”. The
default value is “ON”
Dip switch pin 6: Master/slave (enable/disable). Only the master can be controlled
by the external controller, the others switches in the system must be slave.
•
ON: RS-485 is the master in the serial chain and RS-232/LAN is enabled
•
OFF: RS-485 is the slave in the serial chain and RS-232/LAN is disabled
Dip switch pin 7: Switch between RS-232 or LAN connection. The default value is
“OFF”
•
ON: RS-232
•
OFF: LAN
Dip switch Pin 8: Resets the web server IP address to 192.168.0.3, the default value
is “OFF”.
To reset the IP address
1.
Set Pin 8 to ON and restart the matrix
2.
After the matrix starts, shut it down again after 10 seconds
3.
Set Pin 8 to OFF, then power on the matrix, the IP address will be set to
default value: 192.168.0.3
5.6.5 DIP Switch (2 pins)
