1. The fan should be cleaned and maintained in time according to the use environment and the required electrostatic protection requirements
in order to ensure the good performance of the product. That is, gently remove the dust on the electrode, discharge bracket, fan and metal
mesh cover with electrostatic brush, dust-free cotton swab, dust-free cloth dipped in anhydrous alcohol. Note:
A. Operation must be done 10 minutes after power cut of
B. The cleaning cycle of the electrode needle should be set according to the working environment during use of the fan. It should be
appropriately reduced in the environment with more humid and dusty.
C. The fan must be powered on after alcohol is completely volatilized after cleaning. No other organic solvent can be used to clean the fa
D. The alloy electrode is a consumable product which is not included in the scope of warranty and will be charged for replacement when
repairing.
2. Do not press or rotate the control buttons on the fan panel too hard; otherwise, the device will be permanently damaged.
3. If the working indicator light on the front panel of the fan is off or red, it should be stopped and repaired by professional maintenance
personnel. It can be used only after the electrical performance index is normal.
Maintenance
After-sales service
AP-DJ
2811
ionizing air blower has undergone rigorous testing and aging treatment before ex-work. Its performance has completely reached
the relevant indicators marked in the usage instruction.
AP&T makes a commitment to the customer that any defective parts inspected by AP&T will be repaired or replaced free of charge within one
year from the date of purchase. However, this commitment does not apply to:
1. The device is incorrectly used or installed.
2. Damage caused by negligence or accident during use;
3. Modified, disassembled or repaired by other service departments not authorized by Anping Company.
AP&T shall not be liable for any incorrect use of the products except for repair or replacement of parts as specified above.
