AP&T AP-AY450 Series, Product Instruction Manual, Page: 3 / 4

1. Insert the national standard power cord plug into the mains socket.
2. Insert the high-voltage connector of the static elimination device into the high-voltage output socket of the power supply and connect its
ground terminal to the ground stud of the high-voltage power supply.
3. The switch indicator and status indicator light on(Green light on when working normally) indicates the power supply working normally when
turn on the power switch.
4. The panel description is shown in the following figure:
AP-AY450X Panel description diagram
AP-AY850X Panel description diagram
Installation Guide
Power-on indicator
Ground stud
Ground stud Ground stud
Ground stud
High voltage output
Ground stud
Ground stud
Ground stud
Ground stud
Ground stud
Ground stud
High
voltage output
High
voltage output
Power-on indicator
Three-in-one power switch
Three-in-one power switch
Ground stud
Ground stud
Ground stud
Ground stud
High voltage output