Thank you for purchasing an Apache Technologies, Inc. product. Your
laser system is a premium quality tool that has been designed and
manufactured to provide years of precise and reliable performance.
The system has been specifically designed for use in construction
environments.
This manual is an important part of your purchase as it will familiarize
you with the unit and explain the numerous features that have been
designed into it. Please read this manual thoroughly before using your
laser system.
Please contact your Apache dealer or the Apache factory should you
have questions regarding specific applications or if you require
additional information. Contact information is located on the back cover.
Additional contacts are:
Website:
www.apache-laser.com
E-mail:
Please record your product information below. This will assist you if
there are any questions regarding warranty or service.
PRODUCT:
_______________________
LASER SERIAL NUMBER:
_______________________
DETECTOR SERIAL NUMBER: _______________________
DATE OF PURCHASE:
_______________________
PURCHASED FROM:
_______________________
PHONE:
_______________________
EMC Declaration of Conformity
This laser has been tested and found to comply with the limits for a Class B
digital device for radio noise for digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communication, and is pursuant to
part 15 of the Federal Communication Commission (FCC) rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This laser generates radio frequency. If it’s not used
in accordance with the instructions, it may cause harmful interference to radio
or television reception. Such interference can be determined by turning the
laser off and on. You are encouraged to try eliminating the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the laser and the receiver.
For more information, consult your dealer or an experienced radio/television
technician.
CAUTION:
Changes or modifications to the laser that are not expressly approved
by the manufacturer could void authority to use the equipment.
Application of Council Directive(s):
89/336/EEC directive on EMC
Manufacturer’s Name:
Apache Technologies, Inc.
Manufacturer’s Address:
8261 State Route 235
Dayton, Ohio 45424
U.S.A.
European Representative Address:
Apache Technologies Europe GmbH
Langenberger Str. 590
D-45277 Essen, Germany
Model Name/Number(s):
Horizon
Conformance to Directive(s):
EC Directive 89/336/EEC using
EN55022 and EN50082-1
Equipment Type/Environment:
ITE/residential, commercial
& light industrial
Product Standards:
Product meets the limit B
and methods of EN55022
Product meets the levels and
methods of IEC 801-2, 8 kV air,
4 kV contact IEC 801-3, 3 V/m
26 to 1000 MHz 80%, @ 1 kHz
IEC 801-4, ac leads 2 kV