![Apache Labs ANAN-10 User Manual Download Page 33](http://html1.mh-extra.com/html/apache-labs/anan-10/anan-10_user-manual_2951851033.webp)
Apache Labs ANAN-10 Users Guide
APPENDIX - B – Warranty
WARRANTY:
We warrant that our products are free of defects in material and workmanship and extend
this warranty under intended use and normal service conditions to the original owner for a
period of one year from the date of purchase. This warranty does not apply to any product
that has been repaired (Unauthorized) or altered in any manner and is void if damaged by
accident, neglect, unreasonable use, improper installation, lack of proper impedance
matching (High SWR), improper tuning, over driving power limits, damage due to use of any
third party accessories, or any other cause not arising specifically out of defects in material or
workmanship.
Our obligations are limited to repairing or replacing, at our sole discretion, any product or
part that is returned to the mailing address, all shipping or transportation charges must be
pre-paid, accompanied by proof of purchase and which examination reveals to have been
defective within the warranty period stated above.
Our Warranty does not imply any obligation other than herein stated. Any implied warranties,
including but not limited to fitness for a particular purpose, are limited in duration for the
above one year period.
We shall not be liable under this warranty, or any implied warranty, for loss of use of the
product or for any other consequential loss or damage incurred by the purchaser.
Warranty -- Apache Labs website
has a link to explain their warranty and other
pertitent information:
http://www.apache-labs.com/terms-of-use.html
IMPORTANT
The FPGA and other components on the ANAN-10 PCB can be damaged by Electrostatic
Discharge (ESD). When handling the PCB, you should take ESD precautions (e.g. use a
work bench with an antistatic mat on it and wear a grounded wrist strap).
When powered on do not touch the top of any IC in order to determine its temperature.
In particular, do not touch the Switch Mode Regulator IC. Touching its leads can
change the switching frequency and alter the output voltage.
N9VV and KC9XG
33 of 42
v0.63 January 8, 2013