AP Expert VT-110, User Manual

Page: 71 / 84

Chapter 17: System Monitoring
Resetting Daily Histories
The controller automatically resets all histories when the animal age goes from OFF to 1 day.
1. Using the menu select arrow keys, navigate to Age & Mortality .
2. Decrease the animal age until the word Off is displayed.
3. Press the Edit key to validate.
4. Set the animal age to 1 day.
All history logs except for the Alarm log will be cleared.
Viewing Heater Daily Run Time History
The controller keeps a daily heater run time log for the past 75 days.
1. Using the menu select arrow keys, navigate to Heaters / Feeders .
2. Press on the down arrow key to look at the total run time of the output.
3. Use the down arrow key to scroll down the heater run time history.
Viewing the Hourly History Logs
The controller has a history log where the hourly reading of each output is logged for the past 7 days. The
complete history log (190-day history) can also be saved on a USB drive and viewed in a spreadsheet
application
1. Using the menu select arrow keys, navigate to Monitoring .
2. Select the desired history menu:
Temperature Probes This menu shows the temperature probe readings that were measured every
hour for the past 7 days. It also gives the hourly reading of the average
temperature.
Rel. humidity This menu shows the relative humidity levels that were measured every hour
for the past 7 days. This history is accessible if the inside humidity sensors is
enabled.
Water meters This menu shows the water meter consumptions that were measured every
hour for the past 7 days. This history is accessible if the water meter is
enabled.
Feeders This menu shows the feeder run times that were measured every hour for the
past 7 days. *This history is accessible if feeders are enabled.
Heaters This menu shows the heater run times that were measured every hour for the
past 7 days.
Set Points
This menu shows the temperature set points that were measured every hour
for the past 7 days.
Viewing the Water Consumption History of the Last 48 Hours
The controller has a 60-day water consumption history menu. It can also show you the amount of water
consumed in the last & previous 48 hours.
Using the menu select arrow keys, navigate to Water→Last 48Hr .
890-00081 Expert VT-110 71