AP Expert VT-110, User Manual

Page: 70 / 84

Chapter 17: System Monitoring
This menu is accessible if feeders are enabled.
2. Use the arrow keys to select the desired feeder.
3. Press the Edit key, and then press on the up arrow key to reset the total running time of the selected
feeder.
4. Press the Edit key to validate.
The Yes switches to No , meaning the history has now been cleared.
Viewing the Water Consumption History
The controller has a 60-day water consumption history menu. It can also show you the amount of water
consumed in the last & previous 24 hours.
1. Using the menu select arrow keys, navigate to Water→Water History .
2. Press on the down arrow key to see the total amount of water consumed since the beginning of the
batch.
3. Press on the down arrow key to scroll through the consumption history.
Viewing Daily History Menus
History menus give a daily record of probe readings and of the animal count. These pieces of information
are logged into history menus at midnight.
Using the menu select arrow keys, navigate to the desired history menu:
Option Description
Ambient Temperature This menu contains the daily minimum and maxi-
mum readings of the room temperature of the
past 7days.
Probe Temperatures This menu contains the daily minimum and maxi-
mum temperature readings of each temperature
probe for the past 7 days.
Outside Temperature This menu contains the daily minimum and maxi-
mum readings of outside temperature probes for
the past 7 days. This parameter is accessible if an
outside temperature sensor is enabled.
Relative Humidity This menu contains the daily minimum and maxi-
mum inside humidity readings of the past 7 days.
This parameter is accessible if the inside humidity
sensors is enabled.
Outside Relative Humidity
This menu contains the daily minimum and maxi-
mum outside humidity readings of the past 7
days. *This parameter is accessible if the outside
humidity sensors is enabled.
Static Pressure This menu contains the daily minimum and maxi-
mum static pressure readings of the past 7 days.
*This parameter is accessible if a static pressure
sensor is enabled.
70 890-00081 Expert VT-110