Page
9
S
etting up the driver’s cab
Please follow the steps below to set up the cab of the class 91/Mk4 DVT so you are
ready to move:
1)
Turn the master key in by pressing
Shift+W
.
(class 91 only)
2)
Move the reverser to the ‘neutral’ position by pressing
W
. The TMS alarm will
sound, shortly followed by an AWS self-test.
3)
Cancel the AWS self-test alarm by pressing
Q
.
4)
Turn off the tail lights and turn on the headlights. The keys used to do this
vary depending on which cab you’re in.
5)
Check the door interlock light is lit.
6)
Turn the Driver Reminder Appliance (DRA) off by pressing
Y
.
How to use in the scenario editor
Numbering
When placing a class 91 or Mk4 DVT in the scenario editor, you are able to control
whether it shows a ‘not to be moved’
sign, via the vehicle number.
Example number
91129
;NoMV=L
Key:
91129
- Vehicle number
;NoMV=L
-
A ‘not to be moved’ sign will be applied on the left
-hand side of the vehicle, as you
look at it front-on. To place on the right-
hand side, simply change ‘L’, to ‘R’.
