AP Diving Ltd. RBV07 Swivel Inflator Range Maintenance Manual
Page 48 of 50
7.14 Screw new Schraeder valve into snap connector body
- Use tool AP50E or equivalent to screw a new Schraeder valve into the snap connector
body.
- Screw clockwise. Do not use force.
7.15 Push 4 ball bearings back into snap connector body
- Lightly grease the ball bearings before putting them back in place.
o
This will also help to prevent them falling out again in the process.
- Perform this and the next action above a tray, so you don’t loose the ball bearings if they
happen to drop out.
- Check that all 4 ball bearings are in place before proceeding.
7.16 Put spring onto snap connector body
- Again, make sure you do not lose one of the 4 ball bearings during this step.