6
WARNING:
When turned ON, temperature of the hot air gun ranges
from 100°C 480°C. Injury might occur if not handled properly.
Rewor k ing
OPERATING INSTRUCTIONS
1. Plug the power cord.
2. Turn on the upper right hand switch. Digital readout
of current temperature will appear.
3. Adjust
temperature
and
airflow
according to the type
of component being reworked.
4. When proper adjustment of airflow and temperature
has been set, wait a few seconds for the temperature and
airflow to stabilize.
5. Maintain a 15mm distance between the component
to be soldered and the hot air gun.
6. Move the air gun in a rotating manner focusing
around the component.
7. Wait until the component bonds.
NOTE:
If reworking plastic or larger components,
higher temperature and airflow is needed.
CAUTION! Do not let the air stand in
one position for more than one second.
3
PACKAGE INCLUSION
+ Main Station with hot air gun
Hot air gun holder
Air nozzles
G001 IC popper
Product manual
Power cord
Part No.
Description
10094
Heating Element
30106S
Hot Air Gun Plastic Handle
S002
Hot Air Gun Complete Handle
20962
Hot Air Gun Metal Pipe
10070
Turbine Motor
PARTS LIST
NOTE:
Use only genuine replacement parts.
