9
9
IMPORTANT REMINDERS:
1. Make sure the equipment is placed on a flat stable surface and all
the heat-generating components placed on their respective
holders or stands.
2. Ensure all terminal connections are properly secured.
IMPORTANT:
Please refer to the
CONTROL PANEL GUIDE
page for buttons and
display panel directory.
OPERATING GUIDELINES
A. INITIAL PROCEDURES
1. Plug the device to the main power source using the power cord
provided in the package.
2. Switch ON the device by activating the main power switch.
3. The display panels, will display show “OFF”. The system will remain
at this state until the user activates a function.
B. SOLDERING IRON
1. Connect the Soldering Iron connection assembly to the 7-pin
receptacle located at the front of the control panel (“9” from the
CONTROL PANEL GUIDE).
2. Follow the initial procedures (“A. INITIAL PROCEDURES”).
3. Connect the vacuum tube to the Smoke Absorber Terminal or
Vacuum Cap (“7” from the control panel). If smoke absorber
function is to be used.
4. To activate the “SOLDER IRON” function, press and hold the
soldering iron function button for 3 to 5 seconds (“3” from control
panel). The soldering iron temperature display will momentarily
show the current set temperature then switch to displaying the
actual temperature.
5. Adjust the soldering iron temperature using the SOLDERING IRON
TEMPERATURE ADJUSTMENT buttons (“5” from the control panel).
6. To activate the smoke absorber function, simultaneously press both
up and down button of the soldering iron temperature adjustment
button (“5” from the control panel).