4
PRODUCT DESCRIPTION
The Aoyue Int3210 is a high performance soldering iron. It is
equipped with a fast acting ceramic heater suitable for advance lead
free soldering . The separate tip and heater design offers cost
efficiency and easy replacement of tips.
It has a special programmable sleep function. When activated it
can prolong heater life and save power by shutting off the heating
element whenever no user interaction has been detected for the set
amount of time.
These features will be discussed in greater detail together with
the complete features in the succeeding sections of this manual.
PACKAGE INCLUSION
Power Cord
Soldering Iron
3210 Soldering Station
Soldering Iron stand
9
Aoyue
936 规格
OPERATING GUIDELINES
◆
Saved settings are stored into memory and will remain in effect
un less changed by the user.
4. To signify that sleep countdown is initiated, a small dot will appear
besides the last digit displayed.
5. The system will go into sleep mode upon the expiration of the sleep
timer.
6. The display will show three dashes “ - - - “to signify system is in
sleep mode.
7. To wake the unit from sleep mode, simply pick up the pen or
slightly turn the temperature control knob.
D. CALIBRATION
1. Measure the tip temperature through an external temperature
reader with a thermocouple as its sensor. Ensure the external tem-
perature reader’s sensor and the solder iron’s tip can keep good
physical contact.
2. Adjust to desired temperature. Then allow a few minutes for the
temperature to stabilize, apply a little bit of solder to the tip and
sensor for better readings.
3. Insert a small screwdriver into the calibration hole.
4. Turn screw driver clockwise or counter clockwise to increase and
decrease the temperature, when Displayed temperature and the
external sensor shows the same readings the system has been cali-
brated.
Note: After calibration, the tip’s temperature would be most accurate
only with the tip used to calibrate the system and the set temperature
used during calibration. Other tips or Set temperature level may not be
as precise.
