#
OPERATING GUIDELINES
REMINDERS:
Make sure the equipment is placed on a flat stable surface
and all the heat-generating components placed on their
respective holders or stands.
Ensure all function switches are in the OFF position.
Ensure all terminal connections are properly secured.
IMPORTANT:
Please refer to the
CONTROL
PANEL GUIDE
page for button
switches.
A. PROCEDURES
Plug the power cord into a grounded wall socket. The
station is protected against electrostatic discharge and
must be grounded for full efficiency.
To switch on the unit.
Attach plastic air ducts to the exhaust connector.
The exhaust pipe can be positioned such that maximum
suction is reached.
To turn on the suction press the * button.
To adjust the fan speed press up or down button.
Fan speed is adjustable from 20 to 100 percent
Fan speed is programmed into memory.
The integrated suction hood’s LED lamp needs a 9V battery
to work.
Slide open the battery cover and insert a 9 Volt battery into
the compartment. Put battery cover back in place.
Press the LED switch to turn ON the LED lamp, To turn OFF
the LED lamp press the LED switch again. Turn OFF LED
lamp when not in use to conserve battery life.
