2
TABLE OF CONTENTS
Features …………….……………………………………………… 3
Specifications /Package Inclusions …………………………... 4
Safety Precautions …………………………………………….… 5
Control Panel Guide …………………………………..………… 6
Operating Guidelines …………………………………..….. ….. 7
This manual is designed to familiarize and instruct the
operator with the proper usage and maintenance of the
equipment. The “Care and Safety Precautions” section
explains the hazards of using any type of soldering or
reworking device. Please read carefully and observe the
guidelines in order to maximize usage and minimize the
risk of injury or accidents .
7
IMPORTANT REMINDERS:
1. Make sure the equipment is placed on a flat stable surface.
2. Ensure all terminal connections are properly secured.
IMPORTANT:
Please refer to the
CONTROL PANEL GUIDE
page for buttons and
display panel directory.
OPERATING GUIDELINES
1. Plug the device to the main power source using the power cord
provided in the package.
2. Switch ON the device by activating the main power switch located at
the back.
3. The display panel will show the actual temperature on the Actual
temperature display (“1” on control panel guide) while the set
temperature display (“2“ on control panel guide) would show “OFF”.
The system will remain at this state until the user activates a function.
The systems’ heating element is not activated at this state.
4. To start the heating function press the function activation button. (“3”
from the control panel guide)
5. The display would show the set temperature on the set temperature
display (“2” from the control panel guide). While the actual
temperature display (“1” from the control panel guide) would show the
actual temperature.
6. Adjust the set temperature using the increase and decrease set
temperature button.(“3&4” of the control panel guide).
7. Reflow soldering/ pre-heating process may be done when the desire
temperature has been reached.
8. To disable the heating element simply deactivate the heating function
by pressing the function button (“3” from the control panel guide).
The Actual temperature display would show the temperature of the
heater while the set temperature display would show the word “OFF”
indicating the heater is turned off.
